whole sales E2A-M08KS02-M1-B1 sensor

Cylinder type   sensing head size

M8

Type

Shielded

Sensing method

Inductive type

Sensing   distance

2 mm -10% to   +10%

Setting   distance

0 to 1.6 mm

Differential   distance

10% Max. of   sensing distance

Sensing object

Ferrous metal   (Sensitivity lowers with non-ferrous metals.)

Standard   sensing object

Iron 8*8*1mm

Response   frequency

DC: 1.5 kHz   (average)

Power supply   voltage

12 to 24 VDC   (ripple(p-p) :10% Max.)

Operating   voltage range

10 to 32 VDC

Current   consumption

10 mA Max.

Control output   (Output type)

PNP open   collector output

Control output   (Switching capacity)

0 to 200 mA

Control output   (Residual voltage)

(DC) 2 V Max. (under load   current with cable length of 2m)

Indicator

Operation   indicator(yellow)

Operation mode

NO

Protective   circuit

Surge   suppressor  Output short-cut protection  Power supply reverse polarity protection

Standard or   Different frequency

Standard

Ambient   temperature

Operating: -40   to 70 CEL  Storage: -40 to 85 CEL  (with no icing or condensation)

Ambient   humidity

Operating: 35   to 95 %RH  Storage: 35 to 95 %RH  (with no condensation)

Temperature   influence

+-10% Max. of   sensing distance in temperature range of -25 to +70CEL  +-15% Max. of sensing distance in temperature range of -40 to +70CEL  (As the basis for sensing distance of 23CEL)

Voltage   influence

+-1% Max. of   sensing distance in rated voltage range +-15%. (As the basis for sensing   distance at standard power voltage)

Insulation   resistance

50 M OHM Min.   at 500VDC between charged parts and the case

Dielectric   strength

1000 VAC 50/60   Hz for 1 minute between charged parts and the case

Vibration   resistance

10 to 55 Hz,   1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock   resistance

1000m/s2 for   10 times each in X, Y, and Z directions

Degree of   protection

IEC60529: IP67

Applicable   standard (EC Directive (Low Voltage Directive))

EN60947-1  EN60947-5-2

Applicable   standard (EC Directive (EMC Directive))

EMI:   EN60947-5-2  Emission Enclosure: CISPR11 Group 1 class A  EMS: EN60947-5-2  Immunity ESD: IEC61000-4-2  Immunity RF-interference: IEC61000-4-3  Immunity Conducted Disturbance: IEC61000-4-6  Immunity Burst: IEC61000-4-4  CE marking: Equipped

Applicable   standard (CCC mark)

Not equipped

Connection   method

M12 connector   models

Weight (Packed   state)

approx. 20 g

Material   (case)

Brass nickel   plating

Material   (sensing surface)

PBT

Material   (clamping nuts)

Brass nickel   plating

Material   (toothed washer)

Iron zinc   plating